Safety Performance Index Industri Batik Tulis Berdasarkan Kriteria Majemuk

Nachnul Ansori, Trisita Novianti, Fitri Agustina, Nur Rakhmawati


Accident generally occurs due to the activities which is done in unsafe conditions or even unsafe behavior. These conditions can influence workers productivity. In batik industries, those workers use toxic material and work in non ergonomic atmosphere. Moreover, they also do not take care of the environment and do not use personal protective equipments (PPE). Workers at Madura batik SMEs have not fully realized the significance of occupational health and safety (OHS) in their working areas. The aims of this research is to evaluate OHS performance based on the indicators of safety performance index (SPI), which is multicriteria, in that industri. The safety performance attributes were obtained from factor analysis from the previous study. The index is calculated based on the weighted evaluation results of critical behavior checklist (CBC), integrated with analytical hierarchy process (AHP). As the results, we should give priority to improve the knowledge and experience toward OHS of the workers and also improve the working environment of the Madura’s batik industries. Additionally, the performance of OHS in coloring process is also on the threshold of unsafe condition, further development on the coloring process is needed.


Safety behavior, OSH, creative industry, SPI, CBC, AHP.

Full Text:



  1. Makin, A. M and Winder, C., Managing Hazards in the Workplace using Organisational Safety Management Systems: A Safe Place, Safe Person, Safe Systems Approach, Journal of Risk Research, 12(3-4), 2009, pp. 329-343.
  2. Agustina, F. dan Maulana, A., Analisis Postur Kerja dengan Tinjauan Ergonomi di Industri Batik Madura, Jurnal Inovasi dan Kewirausahaan: Kajian di Negara-negara berkembang, 11(3), 2012, pp.
  3. Agusti, N., Perancangan Ulang Ruang dan Peralatan Kerja dengan Pendekatan Ergonomi Bagi Pembatik Tulis pada Pengrajin Batik Tulis X. Tesis. Fakultas Kesehatan Masyarakat Program Magister Keselamatan dan Kesehatan Kerja Universitas Indonesia, Depok, 2012.
  4. Clean Batik Initiative Centre. Pedoman Penanganan Zat-zat Kimia. Tindakan Pencegahan dan Pertolongan Pertama. German-Indonesia Chamber of Industry and Commerce. (Tahun??)
  5. Clean Batik Initiative Centre. Ho-2 Proses Pem-buatan Batik. German-Indonesia Chamber of Industry and Commerce.
  6. Clean Batik Initiative Centre. Bahan Kimia Berbahaya dalam Pembuatan Batik. German-Indonesia Chamber of Industry and Commerce.
  7. Syamwil, R., Kusumastuti, A., dan Nurrohmah, S. Peningkatan Kinerja Industri Batik Melalui Penerapan Standar Operation Procedure, Ling-kungan, Serta Kesehatan Dan Keselamatan Kerja, Rekayasa, Jurnal Penerapan Teknologi dan Pembelajaran, 8(1), 2010, pp.??
  8. Health and Safety Authority, Behaviour Based safety Guide, The Metropolitan Building, James Joyce Street, Dublin 1, 2013.
  9. Heinrich, H., Industrial Accident Prevention, McGraw-Hill, USA, 1941.
  10. Hurst, P., and Palya, W., Selecting an Effective BBS Process: Fundamental Elements Should Guide Decision Making. Professional Safety, 48(9), 2003, pp. 39–43.
  11. Al-Hemoud and Al-Asfoor, A Behavior Based Safety Approuch at a Kuwait Research Institution, Journal of Safety Research, 37, 2006, pp. 201-206.
  12. Heliani, Pengaruh Sistem Pengendalian Manajemen terhadap Kinerja Manajerial dengan Gaya Kepemimpinan sebagai Variabel Moderating. Universitas Pendidikan Indonesia, 2012.
  13. Saaty, T. L., Decision Making with The Analytic Hierarchy Process. International Journal of Service Sciences, 1(1), 20-08, pp.
  14. Tosolin F., Behavior-based Safety, Giornale Italiano di Medicina del Lavoro ed. Ergonomia 32, 2010, pp.7-??.
  15. Ningsih, A. R., Evaluasi Pelaksanaan Behavior Based Safety pada Program STOP dalam Mem-bentuk Perilaku Aman Tenaga Kerja di PT X Tahun 2013. Universitas Airlangga, 2013.
  16. Wayne, D., An Analysis of the Behavior Based Safety Program at Company XYZ. A Research Paper – University of Wisconsin Stout, 2004.
  17. Hasle, P., and Limborg, H. J., A Review of the Literature on Preventive Occupational Health and Safety Activities in Small Enterprises, Industrial Health, 44, 2006, pp. 6-12.
  18. Kines, P., Andersen, D., Andersen, L. P., Nielsen, K., and Pedersen, L., Improving Safety in Small Enterprise through an Integrated Safety Management Intervention, Journal of Safety Research, 44, 2012, pp. 87–95.
  19. Ansori, N., Novianti, T., Agustina F., dan Rakh-mawati, N., Identifikasi Faktor Pada Kinerja Prilaku Implementasi K3 Industri Batik Bangkalan. Prosiding Seminar Nasional Lemlit. UNM. ISSN:2460-1322, Tempat ?? 2015. pp??
  20. Ansori, N., Novianti, T., Agustina F., dan Hasanah, T. U., Evaluasi Kesehatan dan Keselamatan Kerja (K3)UKM Batik Putra Madura Dengan Behavior Based Safety (BBS). Prosiding Seminar Nasional Sustainable Ergonomic For Better Human Well-Being. Tempat UAJY, 2015, pp.???
  21. Xiongjun, Y., Kaiqan, W., Study on Safety Mana-gement of Small and Medium-sized Enterprises Based on BBS, International Symposium on Safety Science and Technology. Procedia Engineering, 45, 2012, pp. 208-213.


Instructions for Preparing Papers for JTI.docx
Panduan untuk Menulis di JTI.docx

The Journal is published by The Institute of Research & Community Outreach - Petra Christian University. It available online supported by Directorate General of Higher Education - Ministry of National Education - Republic of Indonesia.

©All right reserved 2016.Jurnal Teknik Industri, ISSN: 1411-2485, e-ISSN: 2087-7439

shopify traffic stats
View My Stats